DURMAPRESS -Duct manufacture auto line III introduction

Durmapress recently welcomed a delegation from Mongolia, marking their first visit as a new client specializing in construction and HVAC equipment. Their visit focused on evaluating our metalworking machinery, including the metal shearing machine, angle iron roller, 3-inch duct production line, press brake, and fiber laser cutting machine.

Client Background & Objectives

The Mongolian client, a key supplier of 3-inch ducts and structural components for infrastructure projects, sought equipment to enhance production efficiency. Their goals included:

– Testing metal shearing machines for cutting thick steel plates.

– Evaluating angle iron rollers for shaping 3-inch duct supports.

– Verifying fiber laser cutting machines for precision sheet metal processing.

Outer Mongolia customer visit(1)
Outer Mongolia customer visit(7)

Factory Tour Highlights

In addition, the customer showed great interest in our angle iron roller, which is perfect for forming angle irons used in construction and industrial applications. We demonstrated how it smoothly bends various metal profiles with minimal deformation.

The customer also reviewed our capabilities in fabricating 3 inch ducts, which are commonly used in HVAC systems. Our machines ensure high precision and airtight seams, which are essential in ductwork production.

Of particular note was the demonstration of our high-precision press brake, which features multi-axis control and user-friendly programming. This machine is capable of handling complex bending tasks with repeatable accuracy.

Finally, our Fiber Laser Cutting Machine was presented in action, cutting through stainless steel and carbon steel sheets with clean edges and high speed. The customer was impressed with its performance and ease of operation.

– Verifying fiber laser cutting machines for precision sheet metal processing.

Outer Mongolia customer visit(4)
Outer Mongolia customer visit(5)

On-Site Order & Client Feedback

After in-depth discussions and hands-on evaluation, the Mongolian client expressed strong confidence in the quality of Durmapress equipment and decided to place an order immediately. This included multiple machines tailored to their production needs.The client placed an immediate order for:

– 2 units of 6x2500mm metal shearing machines.

– 1 angle iron roller system optimized for 3-inch ducts.

– 1 fiber laser cutting machine (3000W).

At Durmapress, we are committed to building strong international partnerships and providing reliable solutions for sheet metal processing. We thank our Mongolian guest for their trust and look forward to supporting their production goals.

Outer Mongolia customer visit(6)

Duct manufacture auto line IIl Product information
The wind pipe duct manufacture auto line ll is composed of a feeding rack,a leveling and bead press,a hydraulic press for punching the tip and square punch, a hydraulic shearing machine and a hydraulic folding machine.The electrical control part adopts full computer control,the control system has a closed loop feedback system,and the generation accuracy and stability are obviously improved. ts maximum working speed is16m/min.Suitable for mixed production of common plate flanges,angle steel flanges and plug-in flanges. The length error is ±0.3mm, and the diagonal error is ±0.5mm.This system can meet the production capacity of 1000square meters square air duct in a single shift
Working principle
Coil-feeding-leveling and beading
Punching and cutting square mouth sharp mouth-folding-cutting intoTDF(self-made flange)
Blanking and bending-cutting and corresponding angle iron.inserts are matched with plug-in flange blanking cutting

Basic configuration
A:Two electric feeding racks (with 4 trays B:Aset of bead leveling device
C:Four sets of hydraulic anale cutter with mould
D:A set of hvdraulic shears and hydraulic bendina machines E:A set of computers.controllers and production software

Description:
A: Cut to length, can be used directly with computer plasma cutting machine.
B:(a)CS insert bone shear angle.can be used in conjunction with C-bone flange machine andS insert flange machine
(b)Various connection methods of TDF self-contained flanges canbe used in conjunction withTDFself-contained flange machines and TDF folding machines.
(c)The angle can be cut into various angles used for iron flanges or ziaza flangesAnd can fold out”“mouthand””and can be used with the combined sewing machine to complete a complete set of air ducts
C: It can complete the TDC shearing anale and bend it with the insertflangesuch as the production of”mouth”-shaped air ductsIt can beused with the combined sewing machine to complete the whole set of air ducts.

Share This Story, Choose Your Platform!