Full automatic wind pipe production line III type Brief introduction

Durmapress recently welcomed a delegation from Mongolia, marking their first visit as a new client specializing in construction and HVAC equipment. Their visit focused on evaluating our metalworking machinery, including the metal shearing machine, angle iron roller, 3-inch duct production line, press brake, and fiber laser cutting machine.

Client Background & Objectives

The Mongolian client, a key supplier of 3-inch ducts and structural components for infrastructure projects, sought equipment to enhance production efficiency. Their goals included:

– Testing metal shearing machines for cutting thick steel plates.

– Evaluating angle iron rollers for shaping 3-inch duct supports.

– Verifying fiber laser cutting machines for precision sheet metal processing.

Outer Mongolia customer visit(1)
Outer Mongolia customer visit(7)

Factory Tour Highlights

In addition, the customer showed great interest in our angle iron roller, which is perfect for forming angle irons used in construction and industrial applications. We demonstrated how it smoothly bends various metal profiles with minimal deformation.

The customer also reviewed our capabilities in fabricating 3 inch ducts, which are commonly used in HVAC systems. Our machines ensure high precision and airtight seams, which are essential in ductwork production.

Of particular note was the demonstration of our high-precision press brake, which features multi-axis control and user-friendly programming. This machine is capable of handling complex bending tasks with repeatable accuracy.

Finally, our Fiber Laser Cutting Machine was presented in action, cutting through stainless steel and carbon steel sheets with clean edges and high speed. The customer was impressed with its performance and ease of operation.

– Verifying fiber laser cutting machines for precision sheet metal processing.

Outer Mongolia customer visit(4)
Outer Mongolia customer visit(5)

On-Site Order & Client Feedback

After in-depth discussions and hands-on evaluation, the Mongolian client expressed strong confidence in the quality of Durmapress equipment and decided to place an order immediately. This included multiple machines tailored to their production needs.The client placed an immediate order for:

– 2 units of 6x2500mm metal shearing machines.

– 1 angle iron roller system optimized for 3-inch ducts.

– 1 fiber laser cutting machine (3000W).

At Durmapress, we are committed to building strong international partnerships and providing reliable solutions for sheet metal processing. We thank our Mongolian guest for their trust and look forward to supporting their production goals.

Outer Mongolia customer visit(6)

Line III consists of a feeding metal frame unit, leveler grooving machine, notch and punch acute and square machine, hydraulic shearing machine and hydraulic folding machine. The electrical control system uses a computer combined with a closed-loop servo-system to increase the precision and stabilization of the line. The maximum working speed is 10m/min. The length tolerance is ±0.5mm/m. The diagonal line tolerance is ±0.8mm/m. This system can meet the single shifting production 1000M2 rectangular air duct. The feeding frame can be set to the customer’s requirements.

Full automatic wind pipe production line III  Basic equipment:

A: Two power metal feeding frames with four feed trays
B: One leveler grooving roller machine
C: Four hydraulic angle notch machine with whole set mould
D: Hydraulic shearing machine and bending machine
E: One set computer controller and production instruction software

Operation principle

coiler feeding Leveler grooving punch shear square and acute hole folding cut to TDF cropping
bending cut inserted flange cropping matching angle sheet and inserts
shearing cropping

Manual Instruction:

A. Fixed size cut metal that can be co-used with a plasma cutting machine
B.  a..CS intercalated bone shear angle, can be co-used with C bone flange machine and S insert flange machine

b. Various connecting methods of TDF self flange fixed position cutting angle can co-use with TDF self flange machine and TDF seaming machine.
c.Can cut various angle that used by angle steel flange or zigzag flange. And can fold ” ” ” ” ” ” shape and can be co-used with the combined linking machineso as to complete the whole set of air duct.

C. Can finish TDC shearing angle and bend with insert flange, such as to make style duct. It can be co-used with the combined linking machine and the insert flange so that to complete the whole set of air duct.

Model No Plate thickness (mm) Max plate width (mm) Max working speed (m/min) Coiler max-Weight (kg) Remark
AML-3 0.4-1.2 1300 8 6000  customization

Aditional:

Product dimension: 9000x1600x1200(mm)

Weight: 6T

Power: 10kw

ODM&OEM: Yes

 

After Sales Service

Six years warranty for the whole machine!!

Damaged parts can be replaced free of charge in the warranty period!!

Accept the unconditional return for any quality problem that cause failure application of the machine!!

For more information please contact with me freely.

Share This Story, Choose Your Platform!